INSTALLATION & FUNCTIONAL INSTRUCTION
Outdoor Wireless DMX Controller
T24-OD-CTR
AiSPiRE.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Ave
Ontario, CA 91761
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program
. DEC 2023
2.
GENERAL FUNCTIONAL INSTRUCTION:
1. RELATIVE PRODUCT SELECTION
Unlock the plastic casing and gain access to the selector switch for choosing between the respective product modes: Static White Light or
RGBWW.
Static White Mode: For InvisiLED Outdoor Pro+
RGBWW Mode: For InvisiLED Outdoor RGBWW
FIG. 1
In the provided image, the RGBWW Mode has been visually indicated as the active selection. To toggle the switch between product
selections, perform a power cycle.
2. OPERATION MODE
Select either Wi-Fi or DMX Mode. Both modes cannot be concurrently enabled.
Wi-Fi operates exclusively on the 2.4GHz band. DMX Mode is compatible with both DMX 512-A and RDM (Remote Device Management).
FIG. 2
The example depicted above illustrates the selection of Wi-Fi Mode.
3. CASE IP RATING
Ensure the plastic lid cover is securely closed post-installation to preserve the IP65 rating.
WI-FI CONTROL INSTRUCTION:
1. Ensure that the Wi-Fi operation mode is chosen.
2. Launch the MyWAC mobile app and proceed by following the on-screen instructions. The QR code located on the product sticker will be
required for the Wi-Fi device pairing process, and you can locate this QR code upon opening the plastic cover case.
FIG. 3
QR Code Example
If QR Code pairing does not work, you may try to pair the device with “I don’t have a QR code” mode on MyWAC app, once that is
selected, MyWAC mobile app will start searching device nearby to pair. Unit can be indentify by looking at the SSID sticker on the
product.
DMX INPUT CONTROL INSTRUCTION:
1. DMX INPUT
There is only one way to connect DMX Universe to the system through XLR 3 pins with accessories T24-OD-MW60 or T24-OD-MW120.
To interconnect between wireless DMX Controller unit, please use T24-OD-SW60 or T24-OD-SW120 to daisy chain of DMX signal
between controller unit.
Product Selection
Mode Switch
Operation Mode Switch
Ex. Wi-Fi mode is selected.
QR Code
