WAC HUG, Руководство по установке, Страница: 14 / 32

14
9
8
1. Remove 1 of 3 screws from the mounting ring and loosen the
others (do not remove). Twist-lock the adapter plate into place.
2. Install the adapter plate, by screwing in the previously removed
screw and tightening the others.
09
HANGING THE FAN / INSTALLING THE ADAPTER PLATE
1. Secure wire connectors with supplied wire ties. Double-check
the wire connections before finalizing hanging the fan.
2. Remove the motor from the hook on the mounting bracket. Slide
the motor up to the mounting bracket and place the key hole on
the motor over the screw on the mounting bracket. Turn motor
until it locks in place at the narrow section of the key holes.
3. Align the circular hole on canopy with the remaining hole on the
mounting bracket. Secure by tightening the two screws previously
loosened and the one screw previously removed.
4. Raise up trim ring and line up with the grooves on the
mounting bracket. Once lined up, slide the trim ring and secure
it to the canopy until snug.