1
9
F-068 / F-068L
FIG.14
1.
Secure all wire connections with supplied wire ties to assist
in canopy installation.
2.
Tuck connections neatly into ceiling outlet box.
3.
Slide the canopy up to mounting bracket and place the key
hole on the canopy over the screw on the mounting bracket.
Turn canopy until it locks in place at the narrow section of
the key holes (
FIG.14
).
4.
Align the circular hole on canopy with the remaining hole
on the mounting bracket. Secure by tightening the one screw
previously loosened and the one previously removed.
5.
Adjust the canopy screws as necessary until the canopy and
canopy screw ring are snug.
WARNING
: Make sure tab at bottom of hanger bracket is properly seated in
groove of hanger ball before attaching canopy to bracket. Failure to properly
seat tab in groove could cause damage to
electrical wiring.
11
FINISHING THE INSTALLATION
