WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program.
4
waclighting.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
Step 3: Dimming Adjustment:
14. Use a Phillips head screwdriver to adjust the dimming dial.
15. Rotate until the arrow on the dial is pointed at the desired
wattage. The wattage may be adjusted to the pre-existing tabs
or any value in between.
16. The lower the watage,the dimmer the fixture will be.
17. Please refer to the yellow tag to determine the size of the
required transformer.
Step 4: Beam Angle Adjustment:
18. Note the four pre-determined beam angles on the beam angle
changing dial.
19. Remove shroud before adjusting beam angle (See step 7)
20. Use the provided Hex Key to sightly loosen the set screw one or
CAUTION:
Do not r
for service instruction.
21.
te the dial until the arrow is
aligned with the desired beam angle. This beam angle may be
one of the pre-determined markings or any number in between.
CAUTION: Keep the arro
the beam angle range.
22. Tighten the set screw until it stops. Do not over tighten.
23. Install the shroud
Step 5: Shroud Adjustment
24. Loosen the thumb screw on the shroud.
25. Rotate the shroud until it is in the desired position to properly
26. Retighten the thumb screw to lock the shroud in place.
Shroud
Thumbscrew
INSTALLATION INSTRUCTION
Grand Accent
5212
*16W
*13W
*21W
*26W
*31W
Model: 5212
*Numbers not printed
Beam Angle Dial
Turn dial with
other hand
Hex Key
