WAC Lighting GEOS F-068L, Руководство по установке

Страница: 21 / 36

21 F-068L
22
A
A
B
B
C
C
Air-Gap
Switch*
CONTROLLING THE FAN
12
Your fan was delivered to you with the included remote already
paired to your fan. You will need to remove the pull-tab to begin
using your remote control.
A: Light On/Off, Bright/Dim
B: Fan On/Off, Speed Up/Down
C: Season (Summer/Winter)
Air-Gap Switch: Pull tab to power off in case of emergency.
Not necessary for normal fan operation.
Summer Mode
(Counter-Clockwise)
Winter Mode
(Clockwise)
20 21
Pairing
Press and hold buttons
for 10-15 seconds.
Optional
Wall Control
* Air-Gap Switch only
included with wall control
Remote
Control
Unpairing
To purge, press and hold
buttons for 4 seconds.
NOTE : Your fan features 6 speeds. An audible tone will indicate when
the speed is increased or decreased. When the fan has reached the
minimum/maximum speed level the fan will beep twice.
NOTE : Pairing must be completed within 3 minutes of turning the
power on to the fan receiver. If you wish to pair your remote to another
WAC Smart Fan or if you ever need to re-pair your remote to its original
fan, press and hold the light toggle and fan toggle for 4 seconds until
you hear a short beep, long beep combination from the fan.