Wabtec Ricon FoldOver FR2SS Series, Быстрый старт, Страница: 27 / 85

3 - 9
MAINTENANCE APRIL 2021
32DFR108.C
FR2SS-SERIES SERVICE MANUAL
E. ELECTRICAL AND HYDRAULIC DIAGRAMS
Refer to Table 3-6 for wire color codes used on schematic. Refer to Figure 3-7 for a description of plug and receptacle
designations used on schematic. Refer to Figure 3-8 for a list of symbols used on schematic. Refer to Table 3-7 for an
explanation of labels used on schematic. Refer to Figures 3-9, 3-10 , and 3-11 for diagrams of the ramp hydraulic sys-
tem in its inactive, deploy, and stow modes. The diagrams show the direction and path of fluid flow, and valve posi-
tions. The diagrams are located on the following pages.
Refer to Figure 3-12 for an overall electrical schematic of the ramp system, including that portion supplied by the bus
builder. The electrical schematic is located at the end of this chapter.
TABLE 3-6: WIRE COLOR CODES
CODE COLOR CODE COLOR
BLK BLACK RED RED
BLU BLUE TAN TAN
BRN BROWN VIO VIOLET
GRN GREEN WHT WHITE
GRY GRAY YEL YELLOW
ORG ORANGE
END OF TABLE
RECEPTACLE
(R)
RSM0008700
PLUG
(P)
FIGURE 3-7: CONNECTOR CONFIGURATION
RSM0008800
FIGURE 3-8: SCHEMATIC SYMBOLS