Nieaf-Smitt is a brand name of Mors Smitt
12
www.nieaf-smitt.com
Battery replacement
•
Press on the battery clip to release the battery compartment
on the bottom by holding the grip on both sides
•
Insert the batteries by respecting the correct polarity
•
Remount the battery compartment careful until latching
Parts VoltBeeper Plus
1.
Test probe with LED for voltage indication
2.
ON/OFF button
3.
Grip
4.
Battery release clip
5.
Flashlight ON/OFF
6.
Flashlight
Operation
Warning
Prior to using the device, you should always test it on a known
main circuit to ensure the correct working within the specified
voltage range. To avoid inaccurate measurements, check the device
batteries prior to use by switching on the built-in flashlight.
1.
Press the on/off button to turn on the voltage tester. A double
beep indicates the device is turned on. The self-testing will be
undergone throughout normal operation. The detector tip will
flash to indicate normal operation
2.
Use the detector according to one of the application examples
below. Once a Live AC voltage is detected, the tip glows and
beeper sounds.
3.
The voltage tester will turn off automatically after about 3
minutes of being idle. Otherwise, press and hold the on/off
button to turn off the voltage tester. A long beep indicate that
the device is turned off.
1
2
3
4
5
6
