Page 8 of 14
ASMB0876
–
Hardware Integration Manual
Rev : 2
3.
GENERAL INFORMATION
3.1.
INTEGRATION
Module Integration should be in accordance with the procedures defined by
Digital Mining Technology and only performed by the manufacturer or
authorized representative. Host equipment must be configured to the
modulation schemes and implement LBT to comply with the modular approval
listed in Sec. 2.3 and adhere to all local regulations appropriate for automotive
Installations in the end-user geographic region.
3.2.
MAINTENANCE
This equipment is not intended to be maintained by the end user. Opening the
enclosure should not be attempted, will void any warranty and could compromise the
safe operation of the unit.
No user-serviceable parts.
Contact your local authorized representative for service arrangements.
3.3.
DECOMMISSION AND DISPOSAL
Disposal of
electronics should
be done in
accordance with
local regulations.
Power should be disconnected before decommissioning.
The unit must not be treated as general waste. By ensuring that this product is
disposed of correctly, you will be helping to prevent potentially negative consequences
for the environment and human health which could otherwise be caused by incorrect
handling of this product.
Waste Disposal Method:
Recycling is encouraged. Dispose of in accordance with local,
state and federal laws and regulations.
USA:
Dispose of in accordance with local, state and federal laws and regulations.
Canada:
Dispose of in accordance with local, state and federal laws and regulations.
EC:
Dispose of in accordance with relevant EC Directives.
