WABECO CC-F1220 hs, Руководство по эксплуатации

Страница: 12 / 78

12
2. Delivery and installation
2.2 Installation of the machine
The appropriate bores for the installation of the machine safety cabin onto a WABECO machine base
cabinet are already provided. The machine base cabinet ensures secure positioning of the milling ma-
chine and/or machine safety cabin.
If the machine safety cabin is installed on another suitable installation surface, the 8 through-bores have
to be drilled in the customer‘s installation surface. The positions of the 8 fixation threads (thread M8)
of the machine safety cabin are illustrated below. The diameter of the through-bores in the installation
surface has to be at least 9 mm.
The hexagon bolts (M10) included in the scope of delivery of the machine base cabinet can be used for
adjustments. For this purpose, first screw the hex nut (M10), which are also included in the scope of de -
livery, to the hex bolts. Subsequently, insert the screws equipped with nuts into the four provided threads
from below in the machine base cabinet. The machine base cabinet can now be adjusted by tightening
or loosening the screw. Once the machine base cabinet is adjusted, you can counter the hexagon bolts
with the nuts on the screws to secure their position.
Good work results and low vibration running are only possible if the above mentioned prerequi-
sites for mounting are complied with.