40
5. Rotary table order no. 22310
5.1 Rotate and swivel rotary table
The rotary table (3) can be swiveld by 360° and be rotated by its rotating part.
To rotate the rotary table please proceed as follows:
1. Loosen clamping screw (2.1)
2. Rotate the rotary table (3) to the desired position
3. Retighten the locking screw (2.1)
To swivel the rotary table please proceed as follows:
1. Loosen clamping screw (2.1)
2. Remove the rotary table (3) from the rotating unit (2).
3. Loosen the locking screw (2.2) by approximately 3-4 mm using an Allen key.
4. Pull the rotating unit (2) out of the notches at the frontal sides.
5. Turn the rotary table to the required position and re-engage it in the notches (this adjustment can only be made in
steps of 15° each!)
6. Retighten the locking screw (2.1).
7. Replace the rotary table (3)
8. Retighten the clemping screw (2.2)
By loosen the clemping screw (1.1) the rotary table can be adjusted in its height respectively it can be rotated 360°
around the column (7).
5.2 Drawing and legend
Part no.
Pieces
Order no.
Designation
1
1
51006831-0007
Clamping element
1.1
2
16191200008025
Screw
1.2
2
16193400008000
Nut
2
1
51006831-0008
Rotating unit
2.1
1
16191200008030
Screw
2.2
1
16191200008045
Screw
2.3
1
16112500008001
Washer
3
1
51006831-0009
Rotary table
