WABCO TRAILER iABS 1M PREMIUM, Руководство по установке

Страница: 14 / 38

14
Installation
2. Connect the air delivery lines from the service chambers to the ECU/single modulator valve assembly
Port 2 (3/8-inch NPT).
„
Attach the opposite ends of the air delivery lines to the appropriate brake chambers (3/8-inch NPT).
SERVICE/CONTROL LINES
SERVICE BRAKE
SUPPLY AIR
SPRING BRAKE AIR
4014002a
P
O
W
E
R SU
PPL
Y
A
BS SE
N
SO
R
D
A
BS SE
N
SO
R
C
3. Connect the brake service control line to the ECU/single modulator valve assembly Port 4 (3/8-inch NPT).
4. Plug any unused delivery ports.
5.3 Install the Two Sensor Extension Cables (ABS-Prepped Axles)
Instructions for installing sensors on non-ABS-prepped axles are included in Appendix I.
WABCO recommends placing sensors on the axle that will provide the most braking performance. The
suspension manufacturer can provide this information
1. Visually inspect the tooth wheel and sensor to ensure no damage occurred during shipping. Perform
any necessary repairs.
2. Connect the sensor and cables on the prepped axles to the sensor extension cables.
Ensure that each connection is secure.
SENSOR
EXTENSION
CABLE
SENSOR
AND CABLE
4003567b