WABCO TAILGUARD, Описание системы

Страница: 34 / 64

34
Start-up Start-up
8 Start-up
Start-up requires assembly of the components on the vehicle, connection of the
diagnostic computer, supplying the system with power and starting the TEBS E
Diagnostic Software.
8 .1 Training
TEBS E system training is necessary to create a new parameter set. Only after
receiving the PIN 1 are you authorised to make changes to a parameter set
using the TEBS E Diagnostic Software.
A parameter set that has been prepared in advance for parameter setting will be
sufficient in most cases and will simplify the start-up procedure considerably.
Prepared parameter sets can be requested from your WABCO partner.
Start-up using an already prepared parameter set requires PIN 2, which can be
obtained by means of a successfully completed WABCO E-Learning course.
Registration for the WABCO E-Learning course "Trailer EBS E"
(with costs)
For further information please visit out digital learning platform:
wbt.wabco.info
Please contact your WABCO partner if you have any questions.
8 .2 Diagnostic hardware
Diagnosis according to ISO 11898 (CAN 5 V); via an external diagnostic port
COMPONENT / PART NUMBER FIGURE
External diagnostic socket with yellow cap
Diagnostic Interface (DI-2) with USB port
(for connection to a PC)
446 301 030 0
CAN diagnostic cable
446 300 348 0