
4/5
© 2004 American Standard Companies Inc. All rights reserved. 461 307 961 3/01.2005
7.3 Adjust predominance
Carry out test step only on variants 250 and
254.
The exact adjustement can be done by inser-
tion or removing of compensation washers.
Use washers with the following composition:
Material: Steel
Surface protection: gal Zn 6 c yellow
–
Adjust exact pressure with the cap (see fig. 8).
Clockwise rotation: pressure increase
Counter-clockwise rotation: pressure de-
crease
Fig. 8 Position of cap in the device
–
Counter cap by turning the hexagon nut.
–
Adjust pedal to G3.
Gauge 3 must indicate P5.
Gauge 4 must indicate P6.
–
Re-adjust pedal to 0°.
Gauges 3 and 4 must indicate 0 bar.
–
Adjust pedal to G4.
Gauge 3 must indicate P7.
Gauge 4 must indicate P8.
7.4 Check predominance
–
Adjust pedal to G3.
Gauge 3 must indicate P5.
Gauge 4 must indicate P6.
7.5 Distance until venting of P9/P10
–
Adjust pedal to G5.
Pressure must increase immediately.
Gauge 3 must indicate P9.
Gauge 4 must indicate P10.
7.6 Distance until venting of P11/P12
–
Adjust pedal to G6.
Pressure must increase immediately.
Gauge 3 must indicate P11.
Gauge 4 must indicate P12.
7.7 Distance until venting of P2
–
Adjust pedal to G1 (stop within device).
Pressure must increase immediately.
Gauges 3 and 4 must indicate P2.
–
Re-adjust pedal to 0°.
Gauges 3 and 4 must indicate 0 bar.
8.
Circuit failure
8.1 Failure of circuit 1
–
Vent port 11 to 0 bar.
Gauge 1 must indicate 0 bar.
–
Adjust pedal to G1.
Gauge 3 must indicate 0 bar.
Gauge 4 must indicate P2.
–
Re-adjust pedal to 0°.
Gauges 3 and 4 must indicate 0 bar.
–
Vent port 11 with P1.
8.2 Failure of circuit 2
–
Vent port 12 to 0 bar.
–
Adjust pedal to G1.
Gauge 3 must indicate P2.
Gauge 4 must indicate 0 bar.
–
Re-adjust pedal to 0°.
Gauges 3 and 4 must indicate 0 bar.
Washer (approx. 0.4
bar pressure
changement)
Diameter: 25 cm
Thickness: 4 cm
Washer (approx. 0.05
bar pressure
changement)
Diameter: 25 cm
Thickness: 0.5 cm
ii
i
Cap
i
i
i
Brake Valve
with pedal
461 307
1/2