manualshive.com logo in svg

WABCO 2S/2M, Руководство по установке, Страница: 29 / 40

Поделиться
Скачать
WABCO 2S/2M Скачать руководство пользователя страница 29

29

Installation

5.2.4  End of Line Testing without TOOLBOX PLUS™ Software

5.2.4.1 Sensor Installation

1.  Look at the control port on the ECU/dual modulator valve assembly. Ensure that the connectors are 

routed to the correct wheel-end location for a standard semi-trailer, as follows:

ECU/Dual Modulator Valve Assembly Mounted with Control Port Facing Front of Trailer

2S/2M

•

Connect curbside sensor at D.

•

Connect roadside sensor at C.

4S/2M*

•

Connect curbside front sensor at D.

•

Connect curbside rear sensor at F.

•

Connect roadside front sensor at C.

•

Connect roadside rear sensor at E.

4S/3M*— Sensor locations vary by type of installation. Refer to the diagrams for speci

fi

 c sensor 

locations.

•

Connect curbside sensor at D.

•

Connect curbside sensor at F.

•

Connect roadside sensor at C.

•

Connect roadside sensor at E.

ECU/Dual Modulator Valve Assembly Mounted with Control Port Facing Rear of Trailer

2S/2M

•

Connect curbside sensor at C.

•

Connect roadside sensor at D.

4S/2M*

•

Connect curbside front sensor at C.

•

Connect curbside rear sensor at E.

•

Connect roadside front sensor at D.

•

Connect roadside rear sensor at F.

4S/3M*— Sensor locations vary by type of installation. Refer to the diagrams for speci

fi

 c sensor 

locations.

•

Connect curbside sensor at C.

•

Connect curbside sensor at E.

•

Connect roadside sensor at D.

•

Connect roadside sensor at F.

* If the lift axle is sensed in 4S/2M and 4S/3M installations: Sensors E and F must always be used on the lift 
axle to avoid an unwanted ABS indicator lamp illumination.

2.  If sensors are not correctly installed, perform the necessary repairs.

Содержание 2S/2M









































Отзывы:

Нет отзывов