Photo 3
Photo 4
Photo 5
7.
If position is incorrect i.e. the receiver and transmitter not lined up correctly, LCD screen will
show Error (see photo 5). Check front/side sensors are correctly selected and align in position.
8.
The units can be connected wirelessly to computer via USB receiver/cable for data analysis
using eGuard’s self proprietary Smart Management System. Please refer to separate software
manual for details.
USB receiver/cable
9.
The transmission from receiver to computer will take place automatically every 3 minutes. It
can also be transmitted manually by pressing the on/off switch in the transmitter once. The
counts will be transmitted right away. To reset the counter to zero, simply press the on/off
switch in the receiver in two quick successions.
10.
The units can also be connected to power supply (optional and not included in the package). If
power supply is used, the battery will act as back up and come into action when A/C power is
off.
