W6 N 707D free-arm Скачать руководство пользователя страница 7

Страница: 7 / 91

Manual • Cover W6 N 707D Free Arm • 29/10/2019 • 1.0 • GBR

After sewing

Safety notes

1.3 After sewing

Please perform the following tasks after sewing:

•

Clean the cover and remove all dust, small pieces of thread and

lint. Also remove the needle plate and clean the movable feed

dogs underneath.

•

Switch off the cover.

•

Always unplug the

‹power plug›

•

Store the cover in such a way that it cannot fall.

•

Always place the cover where it is beyond the reach of children and

animals.

•

Exchange needles regularly. Worn or damaged needles pose a

hazard.

1.4 Tips for a long service life

To ensure a long service life, please comply with the following:

•

Do not expose the cover to direct sunlight, moisture or high levels

of humidity.

•

Clean and oil your cover at regular intervals. Perform these tasks

thoroughly at least once a year. In the event of increased use,

more frequently.

•

When cleaning the cover, use dry or damp cloths only.

•

Never use benzine, thinners or other chemical agents for the

purposes of cleaning.

•

Do not subject the cover to strong vibrations.

•

The cover is not designed or intended for commercial use.

•

Allow it to be inspected by a W6 workshop (this may result in

additional costs).

•

Frequent sewers should send the cover in for an annual inspection

while an inspection every 2 to 4 years should be sufficient for

normal use.

To do so, order an inspection directly in our W6 WERTARBEIT online

shop at a fixed price.

Содержание N 707D free-arm




























































































Результаты поиска

Содержание N 707D free-arm

Отзывы:

Похожие инструкции для N 707D free-arm

Бренды по названию

Популярные бренды

W6 N 707D free-arm, Руководство пользователя

Результаты поиска

Содержание N 707D free-arm

Отзывы:

Похожие инструкции для N 707D free-arm

Бренды по названию

Популярные бренды