W-Tec Pro 8, Руководство пользователя, Страница: 14 / 19

14
3. After connection, the indicator will show red color, which means the charging is working, when
the indicator turns green, the charging has finished.
DEFAULT SETTINGS
Default settings
8 inches
48 V
P0 Wheel diameter 8
P1 Low-voltage protection (DO NOT CHANGE) 415
P2 Number of pole pairs (for motor) 15
P3 Speed signal selection (DO NOT CHANGE) 1 can not be changed
P4 Kilometres or miles 0
P5 Start with push or immediate start 1
P6 Cruise (1
– yes, 0 – no)
1
P7 Fast start or slow (1
– fast)
0
P8 Speed limiter Can choose from 1-100, set 46
P9 Electronic brake effectivity 2
– high, 1 – medium, 0 – low, set 2
Turn on the display and press the ON / OFF and MODE buttons simultaneously for a few seconds.
Navigate with MODE button. To adjust the pre-set value, briefly press ON / OFF (value then flashes,
press MODE to increase or ON / OFF to decrease value. For saving leave the set values idle for a few
seconds
1. Brake error
2. Motor error
3. Accelerator error
4. Control unit error
5. Display