W-Tec Billar II, Руководство пользователя

Страница: 12 / 15

12
Braking
– shift your weight backwards so that the braking is realized through your feet and not
through handlebar and steering system. Learn well to adjust the gravity center during stopping to
avoid turning over or excessive wearing of the braking and steering system
CLEANING AND MAINTENANCE
•
The scooter must be switched off, disconnected from the charger and the charging port must
be covered before cleaning or maintenance.
•
Clean the scooter with a damp cloth and a mild detergent.
•
Do not use solvents or other aggressive cleaning agents.
•
Keep the water out of the charging port.
•
Resistance is IP54 against dust and rain / splashing water. Never immerse the scooter.
•
Do not use high-pressure cleaners.
•
If the tire pressure is low, inflate it to: (front wheel 2.8 bar, rear wheel 2.5 bar)
•
If you need to replace tires / inner tubes, please contact your specialist dealer or
manufacturer.
•
You can adjust the brake stiffness by loosening the M5 screw. Loosen the screw to the right,
tighten it to the left.
•
Tighten or loosen the brake cable as required.
STORAGE
•
Store in a dry and shady place.
•
Avoid storage if the room temperature exceeds 50
° C.
•
Charge the battery at least once a month. Battery life is lower in cold conditions.