- 3 -
Installation
Installation for Windows 95, Windows 98 and Windows 2000
Before installing the driver, you will need a copy of the operating system installation media, usually
a CD supplied with your computer or operating system.
On Windows 98 systems, the installation files are sometimes archived on the hard disk in
C:\WINDOWS\OPTIONS\CABS. On Windows 2000 systems, the system may prompt you to load
operating system files from the Windows 2000 installation disk. Installation under Windows 95 is
identical to the procedure given above for Windows 98 and Windows 2000. Only Windows 95
OSR2 or higher is supported.
The Setup program also installs Configuration Utility in the WN-2012 Wireless LAN PC Card in the
Program directory. This configuration utility can help you to understand and maintain your Wireless
LAN.
Install Driver
Step 1:
Turn on your computer.
Step 2:
Insert the W-Link WN-2012 Wireless LAN PC Card into the PC Card slot. Align the card
properly before putting it in the slot. Insert the card firmly without forcing until it seats snugly.
CAUTION:
Forcing a misaligned card into the slot can damage the computer or the card.
Step 3:
Windows finds a new hardware shown
DLINK-DW650
and asks for the driver of WN-2012
Wireless PC Card. The driver installation wizard guides you through the steps standard for your
operating system.
Step 4:
You will be asked to supply CDs or directory path information for the driver. This driver
shall be located in the following directory.
D:\DW650\ (if D:\ is your CD-ROM drive)
Step 5:
Windows finds the driver described as
W-Link WN-2012 Wireless LAN PC Card
. Follow the
directions of Windows dialog boxes to complete the driver installation. After completing the
installation, Windows dialog will display
Systems Setting Change
and ask to restart the notebook.
Please click Yes to reboot the computer.
