Page 25 of 34
PQ-132-U
5.5 Ramps and PID control parameters
5.5.1 RA (Command signal ramp time)
Command
Parameters
Unit
Group
RAp:i
x
p= 1|2(Parameter set)
i= UP|DOWN
x= 1… 600000
ms
STD
The ramp times for the pressure command value are defined here in ms. Two separate time values are
entered for increasing and decreasing pressure. They take effect on the command signal input (W).
t
O
u
tp
u
t A
A:UP
A:DOWN
