In summary, after the water is put into the kettle, the
boiling switch (I) and the keep warm button on the kettle
body are pressed and the on/off switch is turned off when
the tea service is finished. The process required for the
water to boil, the teapot to stay hot and minimum energy
consumption is carried out automatically by the device if
the keeping warm is turned on.
The boiling switch should not be turned on when there
is no water in the kettle or it is less than the minimum
limit.
In terms of safety, the device is protected by two
thermostats for such situations, and when it is without
water, these fuses open the circuit and start working again
when water is added.
The tea maker can also be used as a kettle in the kitchen.
In this case, the teapot or special kettle lid should be on
the kettle reservoir. The device, which keeps the water
constantly hot in the energy-saving mode, ensures that
there is always boiling water at hand while working in the
kitchen. Since the heating is minimal while waiting in the
hot state, it can stand ready for a long time before the
existing water evaporates and runs out. The sound of
evaporation, which occurs just before boiling in the kettle,
is normal and ends with boiling.
Содержание GOURMEMAXX
Страница 19: ......
