background image

5

The given maximum power of the speaker system describes short term peaks the system can 

handle as a maximum. The corresponding RMS power is - as of all comparable systems (also 

from other manufactures) - significantly lower. The maximum power of the speaker system must 

never be exceeded. When operating the speaker system, please make sure that the system 

always sounds clear. When distortion can be heard, either the amplifier or the loud speaker is be-

ing overdriven. Overloads can quickly lead to amplifier or speaker damage. In  order to avoid dam-

age, please reduce the volume immediately when distortion can be heard. When speaker systems 

are damaged by overdriving, the guarantee becomes void.

The ambient temperature must always be between -5˚ C and +45˚ C. Keep away from direct 

sunlight (particularly in cars) and from heaters.

The relative humidity must not exceed 50% with an ambient temperature of +45˚ C.

This speaker system must only be installed at a solid, horizontal, anti-slip, vibration and 

oscillation free fire resistant location.

Please note:

 When using this speaker system in public  or industrial areas, a series of safety 

instructions have to be followed that this manual can only give in part. The operator must therefore 

inform himself on the current safety regulations.

Before installing the system, make sure that the installation area can hold a minimum point load of 

5 times the systems weight (e.g. weight 20kg - point load 100kg).

The speaker system must never be installed higher than 100cm with out  a secondary 

attachment.

For over head installations (mounting height >100cm), always fix the speaker system with an 

appropriate safety cable.

The installation area of the speaker system has to be built and constructed in a way that it can 

hold 10 times the weight of the speaker for 1 hour without any deformation.

The top speaker system can be installed on top of a subwoofer (satellite system), on a speaker 

stand or an appropriate wall mounting. The carrying capacity of the extension pole, the speaker 

stand, or wall mounting bracket must never be exceeded.

DANGER TO LIFE!

The subwoofer must never be suspended - Danger to life due to falling 

speaker systems.

DANGER TO LIFE!

The top speaker must only be suspended by experienced and trained 

persons - Danger to life due to falling speakers systems.

Содержание SATURN 12 SYSTEM

















Отзывы: