Page 12
5. Allow approximately 1 liter of the
cleaning solution through the spout
by pressing the hot and cold water
buttons. You can wipe the opening
of the cold water tank opening with
a sponge. The probe and probe
assembly can also be cleaned using
the same solution.
Place a large bucket beneath the drain
outlet located on the back of the unit.
Remove the drain cover and allow the
water to drain from the unit. Water
will start flowing as soon as the drain
cover is removed.
6. Follow the steps for Rinsing the
Water Dispenser. Rinse with plain
warm water 2-3 times, making sure
to also rinse the spout, by pressing
the hot and cold buttons so there is
no residue from the cleaning solution.
The water tank opening and probe
assembly should also be thoroughly
rinsed.
Make sure there is no cleaning residue
before installing a water bottle.
RINSING THE WATER
DISPENSER
1. Remove the two screws located on
the back (at the top, in line with the
switches) of the cooler. Remove the
top cover by lifting at an angle and
pull off. Remove the white cold water
tank cover and the separator which will
allow access to the cold water tank.
2. Pour 0.6 gallons of clean water into
the cold water tank.
3. Place a large bucket beneath the drain
outlet located on the back of the unit.
Remove the drain cover and allow the
water to drain from the unit. Water
will start flowing as soon as the drain
cover is removed.
4. Once water is completely drained,
replace the drain cover. Reinstall
the separator and the cold water
tank cover. Replace the top cover
and secure it with the 2 previously
removed screws.
DRAINING THE
WATER
DISPENSER
Place a large bucket
beneath the drain outlet
located on the back of
the unit. Remove the
drain cover and allow
the water to drain from
the unit. Water will start
flowing as soon as the
drain cover is removed.
VACATION AND MOVING
CARE
• When going on vacation, or if the
water dispenser will not be in use for a
long period turn OFF the hot and cold
switches and Unplug the unit.
• Drain and clean the unit according to
the CLEANING AND MAINTENANCE
instructions.
• When travelling or moving always
transport the unit vertically. Moving
the unit horizontally may damage the
water dispenser and/or its compressor.
• The unit should be covered to protect
from dust or debris.
CLEANING AND CARE
