26
The display shown in Fig. 1.37 comes up
in the event of analyzer program failure.
Refer to 2.6 of the Operation Manual
(Troubleshooting. Table 2.1).
Fig. 1.37
The display shown in Fig. 1.38 comes up
in the event of analyzer program failure.
Fig. 1.38
The display shown in Fig. 1.39 comes up
in the event of program failure in
analyzer
calibration.
Carry
out
calibration.
Fig. 1.39
The display shown in Fig. 1.40 comes up
in the event of erroneous record in the
pad.
On selection of DELETE RECORD
command the record shall be deleted
with no warning and the meter shall
return to the measurement mode.
On selection of
EXIT
command the
meter shall return to the measurement
mode.
On viewing this record in the pad the
display shall show ERROR message.
CALIBRATION
PARAMETERS ERROR
PERFORM CALIBRATION
METER SETTINGS
ERROR
DEFECT METER!
Fig. 1.40
PROBE PARAMETERS
ERROR
SCRATCHPAD RECORD
ERROR
►
EXIT
DELETE RECORD
