Vyyo V284, Руководство пользователя

Страница: 9 / 17

Vyyö V284 WMU User’s Guide
www.vyyo.com
2
3 U
SING THE
M
ODEM
Follow the steps below to use the modem properly.
To use the modem:
1 Check that the computer with which you are using the V284
modem contains a working Ethernet network card, and has
the following software installed and operational:
•
Microsoft Windows 95 operating system or later
•
Access to the Internet
•
A standard Internet browser application
•
The Telnet communications utility
2 Attach your computer to the modem’s LAN port with the
included RJ-45 Ethernet cable.
3 Connect the antenna cable to the CABLE port at the back
of the modem.
4 Plug the 9-Volt modem power supply jack into the POWER
port at the back of the modem, and plug the power supply
transformer unit into a standard electrical wall outlet.
Note: As with any household electrical device, avoid the risk of accidental
electrical shock.
Make sure that your hands are completely dry and that there is
no moisture on the floor or other surfaces in the immediate area of the electrical
wall outlet.
After connecting the power adapter to the modem, verify that
the three green front panel LEDs light up for approximately 2
seconds before going out.
The orange
POWER LED at the left of the front panel lights
up and remains lit, indicating that the modem is powered up.
WARNING: To comply with FCC RF exposure compliance requirements, the
modem should be located in a distance of at least 20 cm from all persons during
normal operation. The antennas used for this product must be outdoor or
indoor, fixed mounted on permanent structures, providing a separation distance
of at least 20 cm from all persons during normal operation.