manualshive.com logo in svg

Vyyo Inc. V290iA, Руководство пользователя

Поделиться
Скачать
Vyyo Inc. V290iA Скачать руководство пользователя страница 25

 

Chapter 3  Installing the V290iA 

V290iA User Guide 

17 

Wall Mounting 

To mount the V290iA on a wall: 

1.  Orient the device so that the main mounting bracket (refer to Figure 3) faces the wall 

and the interface panel faces down. 

2.  Attach the device to the wall using the enclosed mounting screws. 

3.  Attach the interface cables for the SCADA devices at the site to the DB-9 serial 

interfaces on the interface panel. 

4.  Attach the interface cables for any Ethernet-connected devices, such as sensors or 

cameras, to the Ethernet ports on the interface panel. 

5.  Attach the RF antenna to the antenna connectors on the top of the device housing 

(assuming the device is oriented properly). 

6.  Attach the power cable to the power outlet on the interface panel. The device 

powers up. 

7.  Monitor the Modem RF LED on the interface panel to verify that the modem is 

functional. For more information on the Modem RF LED, refer to 

Interface Panel 

LEDs 

on page 29. 

Pole Mounting 

To mount the V290iA on a pole: 

1.  Orient the device so the main mounting bracket (refer to Figure 3) faces the wall and 

the interface panel faces down. 

2.  Place the provided pole mounting bracket around the pole at the desired height. 

3.  Attach the pole mounting bracket to the main mounting bracket of the device using 

the enclosed self-locking press nuts. 

4.  Verify that the device is secure on the pole before proceeding. 

5.  Attach the interface cables for the SCADA devices at the site to the DB-9 serial 

interfaces on the interface panel. 

6.  Attach the interface cables for any Ethernet-connected devices, such as sensors or 

cameras, to the Ethernet ports on the interface panel. 

7.  Attach the RF antenna to the antenna connectors on the top of the device housing 

(assuming the device is oriented properly). 

8.  Attach the power cable to the power outlet on the interface panel. The device 

powers up. 

9.  Monitor the Modem RF LED on the interface panel to verify that the modem is 

functional. For more information on the Modem RF LED, refer to 

Interface Panel 

LEDs 

on page 29. 

Содержание V290iA




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды