-
USE
Vacuum cleaning
1: Before using the device first pull out a sufficient length of mains cable and plug into the main socket. The
yellow mark on the mains cable is the maximum length that must not be exceeded.
To switch on the device, press the foot pedal button on the casing with your foot.
2: To rewind the power cable, press the button
Hold the cable with one hand and guide the cable to ensure that it does not whip causing damage.
IMPORTANT INFORMATION
This Vacuum Cleaner is fitted with an internal safety thermal cut out.
The Vacuum Cleaner will switch off automatically when it overheats.
The Vacuum Cleaner may overheat if the filters are clogged, the hose is blocked or the dust tank is full.
If the Vacuum Cleaner cuts out, empty the dust tank, remove any blockages and clean the filter out before using again.
The Vacuum Cleaner will need 30-60 minutes to cool down.
TRANSPORT AND STORAGE
1. You can lift and carry the vacuum cleaner using the carrying handle. Never pull or lift the vacuum cleaner by the cord.
2. Before putting the vacuum away, switch off the socket, unplug, and press the cord rewind button until the cord is fully
rewound.
3. To save space, the vacuum can be stored upright on its end cover. The telescopic tube can be hung on the vacuum cleaner
by inserting the parking fixture into the vertical parking holder.
CLEANING
Clean the vacuum cleaner by wiping it with a damp cloth ensuring it is dry before using again. You must not use any form of
strong, solvent or abrasive cleaning agent.
Don't forget to register for your 12 month guarantee at
www.vytronix.com
using product code brandnew-vytronix-vtbc01
