4. Rinse thoroughly under clean fresh water. Do not use soap or other cleaning
detergents.
5. Allow filter to dry naturally for at least 24hours before placing back into the
vacuum. Do not place on radiators or use additional appliances, such as a hair dryer, to
dry the filter. Doing so may cause the filter to warp and become unusable.
Cleaning the brush roll:
1. Slide the brush roll securing catch
A
away from the brush as indicated in the
illustration below.
2. Remove the brush roll from the brush housing.
3. Carefully clean and remove any hairs and fibers from the brush roll. Wipe clean
only, do not use any soap or harsh cleaning agents.
4. Allow to dry naturally before replacing the brush roll back into the housing.
5. Slide securing catch
A
back into original position to secure the brush roll.
