6
Operating Instructions
Power switch
• The On/Off power switch has two different positions. (Fig. 5)
• Push on the "
I
" side to turn the vacuum
ON
.
• Push on the "
O
" side to turn the vacuum
OFF
.
F
Fig. 5
Using the unit as an upright vacuum:
•
Insert the handle tube into the handheld vacuum if required.
•
Choose the appropriate accessory (crevice tool or floor head) and attach it to the suction hole opening on the
dust container.
•
Press the
“I”
position on the On/Off power switch turn the unit on. When finished using the u
nit, press the “
O
”
position on the On/Off power switch to turn the unit off.
• When you have finished using the unit, wind the power cord around the cord winding hooks for easy storage.
Using the unit as a handheld vacuum:
• Disconnect the handle tube from the main vacuum by releasing the locking clip and removing.
Note:
You may choose to leave the crevice tool or floor brush attached when using as a handheld vacuum, you
can use the handheld vacuum without any attachment if preferred.
• Press the
“I”
position on the On/Off power switch to turn the unit on. When finished using the u
nit, press the “
O
”
position on the On/Off power switch to turn the unit off.
Cleaning & Changing the Dust Filter
Changing and cleaning the dust filter
In order to achieve the best performance, empty the dust container and clean the filter after each use.
1. To remove the dust container, press down on the dust container release button (Fig. 6)
and separate the dust container from the main unit. (Fig. 7)
Fig. 6 Fig. 7
