vYSoo MOR600, Быстрое руководство по установке, Страница: 11 / 12

DHCP Server
：
This setting is used to configure MOR600’s Dynamic Host Configuration
Protocol (DHCP) server function. MOR600 can be used as a DHCP
server for the internal LAN network. The DHCP server automatically
assigns an IP address to each computer in the LAN network. If you
choose to enable MOR600 s DHCP server option, you must configure all
of PCs in the LAN network to connect to this DHCP server (MOR600),
and make sure there is no other DHCP server on your network.
Start IP Address
：
Enter the values for start IP address. The default start IP address is
192.168.1.100.
End IP address
：
Enter the values for end IP address. The default end IP address is
192.168.1.200.
IP Address
：
The IP Address of the LAN. The default IP address is 192.168.1.1
Net mask
：
The subnet mask of the LAN
Note
：
When DHCP server IP address range is set , it must be assured that
there is no other device in the network to use the IP address located in this
address range , such as printer server , file server , etc . Otherwise there is
11 V 0.7