12
EN
M1.1.WEL30.NLFREN - 11062020
4 Description of control panel
• Left knob:
Selector with heat setting
• Right knob:
Thermostat dial
5 Using instructions
1.
Position the fan heater so that it stands upright on a firm surface and at a safe distance from wet environments and
flammable objects.
2. Connect the fan heater to the mains.
3. Set the thermostat knob to the MAX and let the heater operate with full power.
4. The fan heater will switch on when the heating selector is set to one of the power settings.
5. Once the room reaches the required temperature, heating element will stop working, fan keep working. Once the
temperature decreased, the heating element will be working. The fan heater now starts and stops automatically and thus
keeps the room temperature constant.
6. Before switch off the heater, please turn the thermostat to MIN position and turn the switch to fan position, let the appliance
cool down for two minutes then turn off the heater and pull out the plug.
7. There is an additional thermostat to control the fan motor. If the temperature inside heater is high, the thermostat will also
turn on the fan motor despite that the heater is turned off. For example, after operation, when the heater is turn off, the fan
motor will still operate to cool down the temperature inside.
6 Cleaning and maintenance
1. Before cleaning the appliance, disconnect it from the socket and let it cool down. The enclosure is easily to get dirty, wipe
it often with soft sponge. For every dirty parts, wipe with a sponge dipped in <50°C water and mild detergent, then dry
the heater enclosure with clean cloth. Be careful not to let the water enter the appliance inner. Don’t splash water onto the
heater, never use solvent like gasoline etc. to clean the heater, in order to protect the enclosure.
2. Clean the cord and plug, dry and pack it in a plastic bag.
3.
When you store the heater, let it cool down first, keep it dry. Then cover it with a plastic bag, put in a packing box and
store it in a dry, ventilated place.
•
The user should use the bought power coupler as showed in the figure. The coupler should match with the appliance and
earthing prolong. The coupler should be VDE approved. The length of the power cord can be more than 1.8 m but less
than 3 m, if the power cord is too long and heavy, it can cause the fall off the coupler, electric shock risk or tripping over of
child.
• When you connect the power connector with the appliance, open the lid along with the arrowhead pointed direction,pay
attention to the direction.
3
3.3.1
The user should use the bought power coupler as showed in the figure. The
coupler should match with the appliance and earthing prolong. The coupler should
be VDE approved. The length of the power cord can be more than 1.8m but less
than 3m, if the power cord is too long and heavy, it can cause the fall off the
coupler, electric shock risk or tripping over of child.
3.3.2
When you connect the power connector with the appliance, open the lid
along with the arrowhead pointed direction,pay attention to the direction.
Figure2
After use shut down the appliance firstly, pull out the plug, then put off the
position pin and remove the coupler.
4. Description of Control Panel
IFH03-220
IFH03-300
4.1 Left Knob:
selector with heat setting
4.2 Right Knob:
Thermostat dial
5. Special safety regulations
5.1
Before use, please check the marking on the power cord. Depending on the
power cord type this appliance may be used in different ambient conditions
Type
You can use the appliance in
Do not use in
H07RN-F
household, warehouses and
workshops, building sites or
greenhouses
H05RN-F
household, warehouses and
workshops or greenhouses
building sites
H05RR-F
household, warehouses and
workshops
building sites or greenhouses
5.2
When using electrical appliance basic precautions should always be followed
After use shut down the appliance firstly, pull out the plug, then put off the position pin and remove the coupler.
3
coupler, electric shock risk or tripping over of child.
3.3.2
When you connect the power connector with the appliance, open the lid
along with the arrowhead pointed direction,pay attention to the direction.
Figure2
3.4
After use shut down the appliance firstly, pull out the plug, then put off the
position pin and remove the coupler.
4. Description of Control Panel
BGP1307-150-19G
BGP1307-300-19G
4.1 Left Knob:
selector with heat setting
4.2 Right Knob:
Thermostat dial
5. Special safety regulations
5.1
Before use, please check the marking on the power cord. Depending on the
power cord type this appliance may be used in different ambient conditions
Type
You can use the appliance in
Do not use in
H07RN-F
household, warehouses and
workshops, building sites or
greenhouses
H05RN-F
household, warehouses and
workshops or greenhouses
building sites
H05RR-F
household, warehouses and
workshops
building sites or greenhouses
5.2
When using electrical appliance basic precautions should always be followed
including below:
5.2.1
The fan heater is not suitable for use outdoors in damp weather, in
bathrooms or in other wet or damp environments.
5.2.2
Please note that the fan heater can become very hot and should, therefore,
be placed at a safe distance from flammable objects such as furniture, curtains
Copyrighted
document
- All
rights
reserved
by
FBC
