Vympel CONG Prima 2M, Руководство по эксплуатации

Страница: 16 / 59

Cong Prima 2M - manual 15
Illustration 9: «Service menu» sub-menus
«Restart now»
The “Restart now” function initiates a pre-programmed re-start of the analyzer.
Warning!
If the password is lost, the analyzer must be returned to the manufacturer for reprogramming
to restore access to the service menu.
«Service Def.Par»
This function resets the analyzer to the factory settings. When the operator selects and
confirms this function the message: «FACTORY DEFAULTS» is shown on the display.
In order to save the current parameter settings to the CP 2M’s memory select «PARAM.
SET» using the «
► » button and to confirm the selection touch the « ► » button a second time.
Please note that the current CP 2M parameters may be different from the factory settings
(default parameters).
«Current version»
This function serves to check the version of the software and the check-sum of the CP 2M.
In this mode, the software version and the software check-sum are shown on the display.
(illus. 10):
Illustration 10: Software version and software checksum
«Test 4 … 20mA»
The “Test 4…20mA” function is used to check and adjust the CP 2M analogue data port.
Use the « ▲ » and « ▼ » buttons to set the output value (between 3.5 and 24 mA). The setting
can be adjusted gradually in 0.5 mA increments.