Vxl TC15yy, Руководство пользователя по оборудованию

Страница: 10 / 17

Installation 4
2
Installation
You have to install the client before you can use it. Installation involves setting up the
hardware and connecting the peripherals required for normal use.
To install the Itona TC15yy series hardware, perform the following steps:
1. Unpack the unit.
2. Prepare to connect.
3. Connect the accessories and power.
4. Connect to the server
Each step is explained in detail in this chapter.
Unpacking the Unit
Unpack the unit from its carton box, handle safely to ensue you do not damage any
components during unpacking.
The carton in which the product was shipped to you contains the following:

Itona TC15yy Series Thin Client

Power Adapter AC-DC 16V/2.5A

Power cord

Pedestal

DVI-I to VGA and DVI cable (optional)

Wall / VESA mounting bracket (optional)

Mouse (optional)

Hardware Installation Guide
Note: Please retain the original carton and packing material for future use.
Preparing to Connect
1. Ensure that the following are available at the site where you want to install the product.

100~240V AC, 0.65A, 50/60 Hz, 3-pin power inlet for power adapter.
Note: Ensure that the power inlet plug is regulated and earthed. A floating
ground/chassis could cause an electric shock.

Well ventilated, clean, dry and dust free atmosphere.

Specified environmental conditions. For more information see, Environmental Operating
Specifications on page 8.

Table or desk of suitable size.
2. Fix the pedestals at the bottom of the thin client.