3.Powering ON & Powering OFF
To power on VW898, please Press briefly the ON/OFF button and
wait for 3 seconds until the red light blinks, in any status, to
power off VW898, please press and hold the ON/OFF button until
the indicator light turns off.
4. Taking Picture:
After switching on, it enters into default 1080P mode, press
briefly the SHUTTER button, the indicator light blinks once, then
it takes one picture and then it turns back to standby mode.
pressing briefly the SHUTTER button again to take one more
picture.
5.Video recording:
After switching on, it enters into standby mode in the default
1080P, pressing and holding the SHUTTER button, the red light
blinks and it starts to record video, to pause, please press briefly
the SHUTTER button again, the red light stops blinking and then it
turns back to standby mode.
6.Switch mode:
There are three modes available, in standby mode, pressing
briefly the MODE button once to switch to different mode as
below:
Red indicator light(default) :1920x1080P 30fps
Green indicator light: 1280x720P 60fps
Orange indicator light: 1280x720P 30fp
Notice: The switch will be effective only after video recording has
stopped.
7.Plug to PC:
When VW898 is powered off and plugging to computer, VW898
will be recognized as a removable storage disk, open the disk
to check recording and set time/date stamp.
8.Webcam:
VW898 can work as a webcam, please power it on first, then press
briefly the ON/OFF button again and then plug it to PC, and then
you will find the standard webcam on “my computer”.
9.Time stamp setting:
