VWR International MU 6100 H, Инструкция по эксплуатации

Страница: 56 / 96

Settings MU 6100 H
56
ba77077e02 09/2014
10.1.5 Settings for D.O. sensors
The settings are available in the menu for measurement and calibration set-
tings. To open the settings, display the required measured parameter in the
measured value display and press the
<OK> key. After completing the settings,
switch to the measured value display with <MODE> .
Default settings are printed in bold .
Menu item Possible
setting Explanation
Calibration /
Calibration record
- Displays the calibration record of
the last calibration.
Calibration /
Calibration data
storage
/ Display
- Displays the calibration record.
Further options:
 Scroll through the calibration
records with
<  ><  > .
 Output the displayed calibration
record to the interface with
<F2> /
[USB output] .
 Output all calibration records to
the interface with
<F2
_
> / [USB
output] .
 Quit the display with <F1> /
[Back] or <OK> .
 Switch directly to the measured
value display with
<MODE> .
Calibration /
Calibration data
storage
/ Output to
USB
- Outputs the calibration records to
the interface.
Calibration /
Calibration interval
1 ... 14 ...
999 d
Calibration interval for the D.O. sen-
sor (in days).
The meter reminds you to calibrate
regularly by the flashing sensor
symbol in the measuring screen.
Calibration /
Comparison meas.
On
Off
Enables to adjust the measured
value with the aid of a comparison
measurement, e.g. Winkler titration.
For details, see section 8.2 C
ALI
-
BRATION
, page 42.