VVG Rivdom ONE 16V, Руководство пользователя

Страница: 4 / 10

English
SCOPE OF DELIVERY
1. Riveter
2. Nose piece box with nose pieces
3. Combination wrench for changing the nose
piec es
4. Collecting container
5. Cover cap
6. Hanging clip
7. Belt clip
8. Battery with state-of-charge indicator (optional-
ly with two batteries)
9. Universal quick charger 220 V ~ 12/16/20 V
10. Connecting cable with IEC power connector
11. Operating instructions
12. L-Boxx (optionally in cardboard package) with
inlay
SAFETY PRECAUTIONS
EXPLANATION OF THE SYMBOLS /
PICTOGRAMS IN THE SAFETY PRECAU-
TIONS
This symbol draws attention to that
fact that hazards exist for the life
and health of persons.
Caution! Important safety precauti-
on or directive that must be strictly
observed in order to avoid the
risk of personal injury or machine
damage!
Wear protective goggles!
Before commissioning, read and
observe the operating instructions
and safety precautions!
Remove the main plug
General points to be observed
GENERAL SAFETY PRECAUTIONS
Read all the safety precautions and
instructions. Store all safety precautions
and instructions in a safe place for future
reference.
Failure to observe safety precautions and
instructions can result in electric shock,
fire and/or serious injuries.
SAFETY AT THE PLACE OF WORK
Keep your place of work clean and well
illuminated. Untidiness or inadequately
illuminated places of work can result in
accidents.
Do not work with the riveter in potentially explosive
atmospheres where they may be inflammable
liquids, gases or dusts. Riveters generate sparks
that could ignite the dusts or vapours.
Keep children and other persons away when
working with the riveter. If distracted, you may lose
control over the riveter.
ELECTRICAL SAFETY
The plug of the fast charger must fit
properly into the plug socket. The plug
must not be modified in any way. Do not
use adapter plugs in conjunction with
earthed fast chargers. Non-modified plugs and
matching plug sockets reduce the risk of an electric
shock.
Avoid physical contact with earthed surfaces such
as those of pipes, heaters, cookers and refrigera-
tors. There is an increased risk of electric shock if
your body is earthed.
Keep riveters away from water or rain. The ingress
of water into a riveter increases the risk of an
electric shock.
Do not misuse the cable, e.g. for carrying or
hanging up the fast charger or for pulling the plug
out of the plug socket. Keep the cable away from
heat, oil, sharp edges or moving equipment parts.
Damaged or twisted cables increase the risk of an
electric shock.
When using a riveter outdoors, use for the fast
charger only extension lead that are also suitable
for outdoor use. The use of an extension lead that
12 | English