VVDN_T4240MFCS_User_Manual
Rev. A0-02
14
CONFIDENTIAL
4
BMC and T4240 Reset Interface
Preparing Board:
4.1
1.
Attach an RS-232 cable between T4240 UART port and host computer.
2.
Open a serial console tool on the host computer to communicate with MFCS.
3.
Push the reset button for BMC and show the u-boot console messages.
BMC booting Logs:
U-Boot 2009.01.ast(v0.62)-svn39 (Feb 07 2015 - 13:29:07)
I2C: ready
DRAM: 64 MB
In: serial
Out: serial
Err: serial
H/W: AST2400 series chip Rev. 01
Net: eth_initialize
faradaynic_initialize
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 20080000 ...
Image Name: Linux-2.6.28.9
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1842824 Bytes = 1.8 MB
Load Address: 40008000
Entry Point: 40008000
## Loading init Ramdisk from Legacy Image at 20300000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 3894038 Bytes = 3.7 MB
Load Address: 40800000
Entry Point: 40800000
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing
Linux........................................................................
...........................................
sh: UHCI: unknown operand
sh: UHCI: unknown operand
Starting T4 initialization...
Power sequencing...
T4-power-sequence t4-power-sequence.0: ############# ALL POWERS FOR T4 ARE UP
##############
power sequence successful
Releasing Clock Generator Reset...
Starting clock generation for T4 processor...
Clock generator is configured Starting T4 reset sequences ...
