VVDI MB TOOL, Руководство пользователя

Страница: 15 / 41

VVDI – MB TOOL User Manual
15
2016-03-30
Ver: 1.3
5.2. Functions
1. Mode : Support OBD and IR adaptor read EIS. You need connect OBD line to
car in OBD mode, IR mode only need IR adaptor
2. Chassis : EIS type, support auto detect CAN protocol EIS under OBD mode
3. Allow user : When you select this option, allow input key information, password, VIN
manually
4. Read EIS data : Read basic information and key information from EIS
5. Save EIS data : Save the read EIS data. Support save 2 types: VVDI-MB type and
HC05 type
6. Load EIS data : Load VVDI-MB type EIS data
7. Write EIS data : First you should read EIS or load EIS data, second write EIS data
to new EIS. This function can use to replace EIS. Attention: Only support under IR
mode, but you must connect OBD line to car
8. Renew EIS : Input correct key password and erase password, renew 2
nd
hand
EIS to a new one. Attention: Only support under IR mode
9. Clear TP : This function only use to close transport protection. Once the EIS
activated, this option will be always selected even renew EIS. The EIS without
transport protection closed
doesn’t support write data
10. Disable Key : This function can disable key position
11. Personalize W204 ESL : This function can synchronize key information from EIS to
W204 ESL, use for change W204 ESL. Before run this function, make sure
“EIS
status: Personalized selected, Activated not selected
”, “ESL status: Activated not
selected
”. After success, ESL will have personalized selected. Open ignition with
working key will activate ESL automatically. Attention: Only support under OBD mode,
and chassis number select W172, 204, 207
12. Test EIS status/Working key: This function can test EIS, ELV and working key
status