Vutlan VT591, Руководство пользователя

Страница: 7 / 11

1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
7.
Connecting WDC / Water detection rope
Connect the WDC rope sensor to the VT591 leak sensor.
Wire the WDC rope around or under potentially leaking objects around the perimeter or under raised floors.
Connect the sensor to the monitoring unit. The connection is plug-an-play.
The sensor is ready to use.
Connecting WLC / Water leak cable
Connect the "VT591 / Water leak sensor" to the monitoring unit. The connection is plug-an-play.
Connect "VTC / Terminal cable" to the VT591 sensor.
Connect "WLC / Water detection cable" to "VTC / Terminal cable".
Connect any additional "WLC / Water detection cables" to each other as shown in the picture above to make a chain
connection.
Wire the WLC rope around or under potentially leaking objects around the perimeter or under raised floors.
Put a protective cap on the connector of the last WLC cable in a chain.
The sensor is ready to use.