VuPoint PDS-ST480-VP, Руководство пользователя, Страница: 6 / 14

6
the card is clicked in and latched.
4.3 Turn on/off the Scanner
Turn on/off the scanner by pressing and holding .
Note:
If the scanner is turned on for the first time or the scanner is reset, it will enter Date & Time/Language setup
mode. Once the Date & Time/ Language setting is completed, scanner will enter into standby mode.
By default, Auto-off feature is set to 3 minutes. If the Auto-off feature is set at "3 Min" (refer to section 4.7),
the scanner will automatically turn off if scanning action is not detected within 3 minutes.
To set Date & Time/Language:
1. Press to jump to next setting option: YEAR  MONTH  DATE  HOUR  MINUTE.
Note: press to switch to the previous setting option.
2. Press or to set the figure corresponding to each setting.
3. Press to confirm and move to next setting.
4. After completing the setting for MINUTE, it will enter Language setup screen.
5. Press or to select your desired language.
6. Press to confirm and enter into standby status.
4.4 How to Scan
1. Adjust the Guiding tab to the appropriate spot in accordance to the size of the document
2. Smooth the edge of the document(s) before scanning.
3. Insert the document gently into the slot and the scanner will automatically start scanning.