1
STEP
2
STEP
FRAME
Lay out the lower frame tubes in
a circle; these are the frame
tubes without spring holes. Make
sure that the male end is facing
to the left, and the female to the
right.
Lay out each upper frame tube
around the lower frame tube. Make
sure that they are facing the same
direction as the lower frame tubes.
Position the joiner poles around the
circle.
3
STEP
A
- Slide the male side of each lower frame tube into the lower section
of the joiner pole. Make sure that the foot of the joiner pole is facing
outwards.
B
- Press in the push buttons (2) to insert the female side of the lower
frame tube into the male. Ensure the push buttons pop out the holes to
secure. Repeat until you have completed the lower frame ring.
Repeat
Step 3
for the upper frame tubes.
Note: There are no push buttons - the mat and springs will hold the
frame together.
5
STEP
VULY2
I
ASSEMBLY INSTRUCTIONS
Check to see that your completed frame looks like the image.
Note: The push buttons should be to the right.
8
WARNING: MAKE SURE YOU WEAR THE VULY
GLOVES WHEN YOU INSTALL THE TRAMPOLINE.
STEP
4
A
B
(2)
