Vuly Ring Swing Скачать руководство пользователя страница 2

Страница: 2 / 4

MANUAL

Ring Swing

Replace a Swing Rail on your swing set with the included
Ring Rail.

Ensure that the prongs are closer to the centre than the end
of the swing set.

Slide Foams over both Lower Tubes.

STEP

A. Insert Side Joiners (both left and right) into the corresponding

ends of a Lower Tube.

Ensure that the large hole on the Side Joiners is at the top.

B. Repeat for the other Lower Tube.

step2:covered with foam

make sure the place close to the middle side

Содержание Ring Swing

Страница 1: ...MANUAL Ring Swing Parts List 2x Pillow 4x Upper Tube 1x Padding 2x Foam 2x Side Joiner right 2x Lower Tube 2x Side Joiner left 2x Side Tube 1x Base Mat 1x Hanging Joiner ...

Страница 2: ...e closer to the centre than the end of the swing set Slide Foams over both Lower Tubes 1 STEP 3 STEP 2 STEP A Insert Side Joiners both left and right into the corresponding ends of a Lower Tube Ensure that the large hole on the Side Joiners is at the top B Repeat for the other Lower Tube make sure the place cl ...

Страница 3: ...ch the Hanging Joiner to the Ring Rail on your swing set and secure with the large nut and bolt 5 STEP 6 STEP Step5 install the short lose to the middle side Insert a completed Lower Tube into the sleeves on both sides of the Base Mat 4 STEP step3 Go Insert the Upper Tubes into all four ends of the Hanging Joiner 7 STEP ...

Страница 4: ... the completed lower half of the Ring Swing into the Upper Tubes Place the Padding in the centre of the Base Mat and the Pillows at the ends Secure with Velcro 8 STEP 9 STEP You have attached the Ring Swing to your Vuly swing set CONGRATULATIONS ...