06
VULTA
VOLCANO
INSTALLING BATTERIES
The FC-B45RBW is powered by four AA
batteries—either alkaline, NiCd, or NiMH.
Note:
Make sure to load the batteries with
the positive and negative terminals facing
the proper directions. The FC-B45RBW has
a reverse-polarity protection circuit that
prevents damage due to improper battery
installation, but the flashlight will not turn
on if the batteries are oriented incorrectly.
Lithium batteries are not recommended for
this flashlight.
To install batteries, follow these steps:
1.
Make sure that the flashlight is turned
off.
2.
Unscrew and remove the tailcap from
the flashlight.
3.
Insert the batteries in the proper
orientations according to the + and -
symbols on the inside of the tailcap.
4.
Align the tailcap’s pins with the
corresponding holes, and screw the
tailcap onto the flashlight until fully
tightened.
