Vulcan-Hart VW2C, Инструкция по установке и эксплуатации

Страница: 9 / 12

– 9 –
OPERATION
WARNING: THE DRAWER WARMER AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN
OPERATING, CLEANING OR SERVICING THE DRAWER WARMER.
CONTROLS (Fig. 1)
Fig. 1
OPERATOR INDICATOR LIGHT – Lit when heat is supplied to drawer warmer.
FULL RANGE THERMOSTAT – Acts as the ON/OFF switch to the drawer warmer system.
• Turn to desired temperature setting to turn ON.
• Turn counterclockwise until it stops to turn OFF.
THERMOMETER (not shown) – Indicates interior temperature of drawer warmer.
BEFORE FIRST USE
WARNING : UNPLUG ELECTRICAL POWER SUPPLY BEFORE CLEANING.
1. Clean drawer warmer thoroughly.
a. Use mild soap and water solution to clean drawer warmer.
b. Rinse thoroughly and wipe dry with a soft clean cloth.
c. Clean all accessories.
d. Rinse thoroughly and wipe dry.
2. Operate drawer warmer in highest temperature setting for a period of 30-45 minutes. (See
Operating Drawer Warmer.)
PL-41269-1
OPERATOR INDICATOR LIGHT
FULL RANGE THERMOSTAT