Vulcan Push & Gear Trolley
7
2020-02-05, rev1a
Operation
Operation Procedures
1
Prior to lifting, make sure the lift can be performed safely
and the lift path is clear
2
Ensure the beam is of suitable capacity for the load and
will not be damaged by the trolley rolling on the flange
3
Make sure the beam is fitted with stops at both ends to
prevent the trolley from rolling off
4
Make sure the load is properly centered below the trolley
5
Verify that all lifting devices used (including the trolley) are
properly fastened and of suitable working load limit
6
While performing the lift, do not let people to stay in or
cross the “fall zone” under the trolley
7
While performing the lift, do not allow the load to swing or
to move briskly
8
If using a push trolley, push the load from behind to move it
9
If using a gear trolley, steadily pull down on the hand chain
to move the load
10
At the end of the travel path slow down the load gently and
do not allow the trolley to hit the stoppers
WARNING
NEVER
stay or pass through the “fall zone” under the
trolley.
ALWAYS
keep your hands and feet away from the “fall
zone” under the trolley
.
