— 7 —
VCV SERIES COOK AND HOLD OVEN SYSTEMS
ELECTRICAL CONNECTION
The VCV13 and VCV6 ovens are dual voltage,
factory wired for 208/240 Volts AC, single phase,
50 or 60 Hz service. The VCV4 and VCV5 ovens
are factory wired for 120 Volts AC, 60 Hz service.
Before connecting the
oven to the power source, verify that the
voltage and phase of the power source
are identical to the voltage and phase
information on the data plate.
Electrical and grounding
connections must comply with the
applicable portions of the National
Electrical code and/or other local
electrical codes.
Do not store or use gasoline
or other flammable vapors or liquids in the
vicinity of this or any other applicance.
All cabinets are equipped with a durable, suitable,
8-ft. (2.4 m) cord and NEMA 5-15 plug as
standard equipment. The cord and plug come
with a proper strain relief to prevent unit from
moving away from electrical connection.
Refer to wiring diagram in this manual for
proper connection.
Do not store flammables near unit.
1. At the circuit breaker, turn off power to the
circuit to which the oven system is to be
connected.
2. Check that the oven Power ON/OFF
Switch is in the OFF position.
3. Connect the power cord from the oven
system to the electrical power source.
4. At the circuit breaker, turn on power to
the circuit.
