Vulcan-Hart V SERIES VBP13I ML-126359, Инструкция по установке и эксплуатации

Страница: 5 / 16

— 5 —
V SERIES
INSTALLATION CODES AND
STANDARDS
The APPLIANCE must be installed in
accordance with:
In the United States of America:
1. State and local codes.
2. National Electrical Code, ANSI/NFPA-70
(latest edition). Copies may be obtained
from The National Fire Protection
Association, Batterymarch Park, Quincy,
MA 02269.
In Canada:
1. Local codes.
2. Canadian Electrical Code, CSA C22.1
(latest edition). Copies may be obtained
from The Canadian Standard
Association, 178 Rexdale Blvd.,
Etobicoke, Ontario, Canada M9W 1R3.
ELECTRICAL CONNECTIONS
Electrical and grounding
connections must comply with the
applicable portions ofthe National
Electrical code and/or other local electrical
codes.
The cord and plug supplied, is a suitable
durable cord with molded plug and is provided
with a proper strain relief.
Appliances equipped with
a flexible electric supply cord provided
with a three-prong grounding plug. It is
imperative that this plug be connected
into a properly grounded three-prong
receptacle. If the receptacle is not the
proper grounding type, contact an
electrician. Do Not remove the grounding
prong from this plug.
Refer to wiring diagrams in this manual.
All cabinets are equipped with an 8 ft. (2.4 m)
cord and NEMA 5-15 plug as standard
equipment.
The banquet cart series are factory wired for
either 110/120 volt or 208/240 volt, single
phase operation.
• All 208/240 volt carts are equipped
with an 8 ft. (2.4 m) cord and NEMA
6-15 plug.