– 12 –
5. Replace back tops and backsplashes.
6. If front plates do not line up perfectly, adjust by means of bolts under front plate. Similar front
adjustment is provided for the one-piece cast iron griddle (Model GH60) (Fig. 4).
Fig. 4
Riser, Backguard and High Shelf
Remove the shipping brackets on the corner of the range where a high shelf support casting is to be
bolted. It is not necessary to remove either shipping bracket on ranges equipped with a backguard as
the brackets will be used for support when remounting the rear top plate and backguard backsplash.
1. Carefully unpack riser, backguard or high shelf with back down, on floor in front of range. Remove
backsplash panel from riser, backguard or high shelf.
2. Remove top castings, back top and shipping brackets from the range. Identify top casting(s) so
they are replaced in the same positions on the same range as when received from the factory.
When assembling a riser, backguard or high shelf to batteried equipment, remove only the extreme
right and left shipping brackets of setup section requiring mounting (Fig. 5).
PL-40047-1
