Vulcan-Hart ERC50 Скачать руководство пользователя страница 25

Страница: 25 / 28

— 25 —

TROUBLESHOOTING

ALARMS AND ERROR MESSAGES

Open Probe

- If an open probe is detected, the heat demand is disabled and any running cooking cycles

are cancelled. All operator buttons are disabled. The control displays the following message:

ERD Models -

Prob

ERC Models -

OPEN PROBE

The alarm sounds continuously until the fault clears or the fryer is turned off, then back on. If the problem
persists, call service.

Shorted Probe

- If a shorted probe is detected, the heat demand is disabled and any running cooking

cycles are cancelled. All operator buttons are disabled. The control displays the following message:

ERD Models -

ERC Models -

SHORTED PROBE

The alarm sounds continuously until the fault clears or the fryer is turned off, then back on. If the problem
persists, call service.

Hi Temperature

- If the temperature is greater than or equal to 415°F (212°C), the heat demand is

disabled and any running cooking cycles are cancelled. All operator buttons are disabled. The control
displays the following message:

ERD Models -

ERC Models -

SHORTED PROBE

The alarm sounds continuously until the fault clears or the fryer is turned off, then back on. Normal fryer
operations resumes when temperature drops below 415°F (212°C). If the problem persists, call service.

Содержание ERC50





























Результаты поиска

Содержание ERC50

Отзывы:

Похожие инструкции для ERC50

Бренды по названию

Популярные бренды

Vulcan-Hart ERC50, Руководство по установке и эксплуатации

Результаты поиска

Содержание ERC50

Отзывы:

Похожие инструкции для ERC50

Бренды по названию

Популярные бренды