5.
Remove screws, stand-offs, and CEF controller
board.
6.
Reverse procedure to install.
ROCKER SWITCH
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
NOTE:
There are three rocker switches.
Replacement procedure is same for all.
1.
2.
Disconnect rocker switch from harness.
3.
Remove rocker switch (Fig. 10) from control box
assembly.
Fig. 10
4.
Reverse procedure to install.
24V RELAY
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1.
2.
Disconnect wires from relay (Fig. 11).
Pin
Wire
1
NC
2
NC
3
63
4
NC
5
65
6
NC
7
56
8
42
Fig. 11
3.
Remove nuts and relay.
4.
Reverse procedure to install.
DRAIN VALVE POSITION SENSOR
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1.
2.
Rotate and lift to remove fryer door plate (Fig.
12).
CEF40/75 FRYER - REMOVAL AND REPLACEMENT OF PARTS
Page 7 of 25
F45657 (0517)
